Calibration procedure of Discrete Element Method (DEM) parameters for wet and sticky bulk materials

- Carr, Michael J., Roessler, Thomas, Robinson, Peter W., Otto, Hendrik, Richter, Christian, Katterfeld, Andre, Wheeler, Craig A.

Influence of inclined channel spacing on dense mineral partition in a REFLUX™ Classifier. Part 1: continuous steady state

- Galvin, K. P., Iveson, S. M., Zhou, J., Lowes, C. P.

Novel jamming mechanism for dry separation of particles by density

- Kumar, D., Iveson, S. M., Galvin, K. P.

Ultrafine desliming using a REFLUX™ classifier subjected to centrifugal G forces

- Carpenter, J. L., Iveson, S. M., Galvin, K. P.

Analogue iron ore sinter tablet structure using high resolution X-ray computed tomography

- Harvey, Tobin, Honeyands, Tom, Evans, Geoffrey, Godel, Bélinda, O'Dea, Damien

Deconvolution of fractionation data to deduce consistent washability and partition curves for a mineral separator

- Galvin, K. P., Iveson, S. M., Hunter, D. M.

Dry separation using a fluidized Sink-Hole

- Kumar, D., Iveson, S. M., Galvin, K. P.

Evaluation of compressive strength and shear strength of the adhering layer of granules in iron ore sintering

- Zhou, Mingxi, Zhou, Hao, Honeyands, Tom, O'dea, Damien Paul, Ellis, Benjamin George, Ma, Pengnan, Li, Yawei

On uniaxial compression and Jenike direct shear testings of cohesive iron ore materials

- Chen, Wei, Roberts, Alan, Williams, Kenneth, Miller, Jeremy, Plinke, Jens